Accessories

Plastic gland plate with metric knockouts, for AX

Shop Now
Fibre-optic cassettes for Network Cable Organizer

Shop Now
Cable shunting ring

Shop Now
Cable routing bars for universal use

Shop Now
Cable routing bars, 482.6 mm (19") attachment

Shop Now
Snap-in cable routing for clipping into the system punchings.

Shop Now
Nylon loop cable holder self-adhesive

Shop Now
Fibre-optic shunting rings

Shop Now
Cable management duct, horizontal 482.6 mm (19")

Shop Now
Cable management panel with plastic rings

Shop Now
Surplus cable holder

Shop Now
Shunting ring

Shop Now
Cable management panel, 2 U

Shop Now
Cable tray, 2 U

Shop Now
Cable clamp rail Right-angle section for VX, TS, SE, PC, base/plinth system VX

Shop Now
Punched section with mounting flange, 14 x 39 mm for VX, TS, SE, PC, IW, AX

Shop Now
Brush strip, vertical for VX IT

Shop Now
TS adaptor for wiring systems Adaptor rail for the LSC wiring system.

Shop Now
Cable organiser for TE open

Shop Now
Cable duct for vertical TS section

Shop Now
Aluminium rivet

Shop Now
Cable route for TS

Shop Now
Cable clamp rail, depth-variable for VX IT, TE

Shop Now
Cable duct for VX IT, TE

Shop Now
Cable route for VX, VX IT

Shop Now
Cable management panel with brush strip 482.6 mm (19")

Shop Now
Fibre-optic cable management panel, 1 U 482.6 mm (19")

Shop Now
Cable clamp rail for TS, TS IT

Shop Now
System supports for cable routes for VX, VX IT

Shop Now
Cable finger for VX IT

Shop Now
SZ Connection cable, for System light LED compact, L: 3000 mm

Shop Now
SZ Door-operated switch, for System light LED compact, L: 3000 mm, with LED connection cable

Shop Now
SZ Door-operated switch, for System light LED compact, L: 1000 mm, with LED interconnecting cable

Shop Now
SZ Interconnecting cable, for System light LED compact, L: 600 mm

Shop Now
SZ Interconnecting cable, for System light LED compact, L: 1000 mm

Shop Now
SZ Interconnecting cable, for System light LED compact, L: 3000 mm

Shop Now
VX Mounting kit magnet, for LED system light

Shop Now
SZ Compact light, WHD: 455x59x24 mm, 8 W, 100-240 V, 50/60 Hz, Integral on/off/door-operated switch mode, ENEC

Shop Now
SZ Compact light, WHD: 705x59x24 mm, 14 W, 24 V DC, Integral on/off/door-operated switch mode, ENEC

Shop Now
SZ Mounting kit magnet, for compact light and System light LED compact

Shop Now
SZ Courtesy light, WHD: 452x117x50 mm, 14 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

Shop Now
SZ Courtesy light, WHD: 452x117x50 mm, 14 W, 100-240 V, 50/60 Hz, with door-operated switch, with earthing-pin socket

Shop Now
SZ Courtesy light, WHD: 682x117x50 mm, 18 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

Shop Now
SZ Courtesy light, WHD: 682x117x50 mm, 18 W, 100-240 V, 50/60 Hz, with door-operated switch, with earthing-pin socket

Shop Now
SZ Courtesy light, WHD: 987x117x50 mm, 30 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

Shop Now
SZ Courtesy light, WHD: 987x117x50 mm, 30 W, 100-240 V, 50/60 Hz, with door operated switch, with earthing-pin socket

Shop Now
Door-operated switch

Shop Now
Mounting kit for door-operated switch for TE 8000

Shop Now
Installation kit for door-operated switch in TE 7000

Shop Now
Adaptor power pack for LED compact system light

Shop Now
SZ Door-operated switch, with connection wire, L: 800 mm, black

Shop Now
SZ Jack, for power supply and through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

Shop Now
SZ Jack, for power supply and through-wiring, 2-pole, 24 V DC, Connection accessories for self-assembly

Shop Now
SZ Jack, for power supply and through-wiring, 2-pole, 100-240 V, Connection accessories for self-assembly

Shop Now
SZ Connector, for through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

Shop Now
SZ Connector, for through-wiring, 2-pole, 24 V DC, Connection accessories for self-assembly

Shop Now
SZ Connector, for through-wiring, 2-pole, 100-240 V, Connection accessories for self-assembly

Shop Now
LED system light US version

Shop Now
SZ Connection cable, for power supply, 3-pole, 100-240 V, L: 3000 mm

Shop Now
SZ System Light LED, 400 Lumen, L: 262 mm, 100-240 V

Shop Now
SZ System Light LED, 600 Lumen, L: 337 mm, 100-240 V

Shop Now
Component shelf 2 U, static installation

Shop Now
Component shelf for frame attachment Enclosure width 600 and 800 mm

Shop Now
Component shelf 1 U, static installation 482.6 mm (19") system punchings

Shop Now
Component shelf, pull-out for TS, SE, PC, IW

Shop Now
Fastening bolts for slotted component shelves

Shop Now
Component shelf, pull-out 482.6 mm (19") for VX IT, TE, TS IT

Shop Now
Mounting plate for terminal boxes KX, bus enclosures KX, terminal boxes HD, Ex enclosures

Shop Now
Baying connector, external for TS/TS

Shop Now
Baying connector, external, 9 mm for VX, VX IT, TS IT/TS IT with side panels

Shop Now
Cover plate for CM, TP

Shop Now
Levelling feet for VX, TS, SE, PC in stainless steel

Shop Now
Levelling feet for VX, VX IT, TS, TS IT, SE, PC, IW, Blue e+ chillers

Shop Now
Levelling feet with internal adjustment, for VX IT

Shop Now
Levelling feet for FlatBox, M10 x 20 mm

Shop Now
Base/plinth adaptor for twin castors and levelling feet

Shop Now
Door stay for AX

Shop Now
Door stay

Shop Now
Door stay for escape routes for TS, SE, PC

Shop Now
Door stay for VX

Shop Now
180° hinge for AX, AX IT

Shop Now
180° hinge for VX IT bayed rack suites with comfort handle

Shop Now
180° hinge

Shop Now
180° hinge for VX

Shop Now
180° hinge for VX swing frame, large

Shop Now
130° hinges

Shop Now
Cover hinge for terminal box KX

Shop Now
Lock insert

Shop Now
Enclosure key

Shop Now
Lock cover Prepared for lead seal

Shop Now
Lock cylinder inserts

Shop Now
Lock insert for handle systems

Shop Now
Locking bar latch to CNOMO

Shop Now
Locking bar latch to CNOMO for VX

Shop Now
Cam lock

Shop Now
Comfort handle AX for compact enclosures AX with locking rod

Shop Now
Comfort handle for TS, TS IT, SE, PC, IW

Shop Now
Comfort handle VX for VX, VX IT

Shop Now
Comfort handle VX with numerical code, for VX, VX IT

Shop Now
Multiple lock for 6 padlocks

Shop Now
Mini-comfort handle for EL 3-part

Shop Now
Main switch integral For door

Shop Now
Mini-comfort handle AX

Shop Now
Mounting adaptor for comfort handle VX with coded lock or radio comfort handle VX

Shop Now
Security lock

Shop Now
Profile half-cylinders for handle systems

Shop Now
Plastic handles

Shop Now
Semi-cylinder lock for AE

Shop Now
T handles

Shop Now
Adjacent door latch for TS

Shop Now
Radio comfort handle VX with card reader for VX, VX IT

Shop Now
Security handle with code

Shop Now
Spring washer for TS locking bar

Shop Now
Corrosion protection primer

Shop Now
Primer/paint

Shop Now
Sheet steel door, vertically divided, solid for DK-TS

Shop Now
Sheet steel door for DK-TS

Shop Now
Sheet steel glazed door, vertically divided for TS 8

Shop Now
Sheet steel door, one-piece, solid for VX IT

Shop Now
Sheet steel door, one-piece, vented for VX IT

Shop Now
Sheet steel door, vertically divided, solid for VX IT

Shop Now
Sheet steel glazed door, vertically divided for VX IT

Shop Now
Sheet steel door, vertically divided, vented for VX IT

Shop Now
Glazed door, vented for TS, TS IT, SE

Shop Now
Glazed aluminium door, one-piece for VX IT

Shop Now
Glazed door for TS, TS IT, SE

Shop Now
Glazed door for VX

Shop Now
Lock components for VX

Shop Now
Lock components for TS, TS IT, SE

Shop Now
Lockable and adjacent door for TS, TS IT, SE

Shop Now
Lockable and adjacent door for VX

Shop Now
Aluminium/sheet steel door, vented for VX IT

Shop Now
Protective bar for VX, TS, SE

Shop Now
Handle adaptor for comfort handle

Shop Now
Shipping brace for door VX

Shop Now
Holder for protective bars

Shop Now
Adjacent door latch

Shop Now
Interconnecting rods

Shop Now
Interlock kits for VX

Shop Now
Operating mechanism

Shop Now
TS isolator door cover (US version)

Shop Now
Ride-up roller for TS, SE, PC

Shop Now
Alternate frame, magnetic

Shop Now
Ride-up roller for VX

Shop Now
CMC III Wireless Unit for radio comfort handle VX

Shop Now
Filter mat for base/plinth trim panels, vented

Shop Now
Base/plinth trim panels, side, sheet steel, optimised design, 100 mm for base/plinth system VX, sheet steel

Shop Now
Base/plinth trim panels, side, sheet steel, optimised design, 200 mm for base/plinth system VX, sheet steel

Shop Now
Base/plinth trim panels, side, sheet steel, optimised design, 100 mm for base/plinth system VX, sheet steel

Shop Now
Base/plinth corner piece with base/plinth trim panels, front and rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW

Shop Now
Base/plinth corner piece with base/plinth trim panels, front and rear, 200 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW

Shop Now
Base/plinth corner piece with base/plinth trim panels, front and rear, 100 mm, stainless steel for VX, TS, SE

Shop Now
Base/plinth corner pieces with base/plinth trim panels, front and rear, optimised design, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW

Shop Now
Base/plinth corner pieces with base/plinth trim panels, front and rear, optimised design, 200 mm for VX, VX IT, VX SE, TE, TS, TS IT, SE, CM, TP, PC, IW

Shop Now
Base/plinth corner pieces with base/plinth trim panels, front and rear, 200 mm, stainless steel

Shop Now
Base/plinth trim panels, side, 100 mm, stainless steel for base/plinth system VX

Shop Now
Base/plinth trim panels, side, 200 mm, stainless steel for base/plinth system VX

Shop Now
Base/plinth trim panels, vented for base/plinth system VX

Shop Now
Base/plinth trim panels with brush strip for base/plinth system VX

Shop Now
Base/plinth trim panels, side, sheet steel, optimised design, 100 mm for base/plinth system VX, sheet steel

Shop Now
Base/plinth trim panels, side, sheet steel, optimised design, 200 mm for base/plinth system VX, sheet steel

Shop Now
Transport castors for base/plinth system VX

Shop Now
Levelling component for base/plinth system VX

Shop Now
Filter mat for base/plinth trim panels, vented

Shop Now
Base mounting plate for base/plinth VX and AX and base/plinth, complete

Shop Now
Base/plinth trim panels, side, 200 mm for AX

Shop Now
Base/plinth components, front and rear, 200 mm Stainless steel for TS, SE

Shop Now
Base/plinth trim panels, side, 100 mm Stainless steel for base/plinth components front and rear

Shop Now
Base/plinth components, front and rear, 100 mm Stainless steel for TS, SE

Shop Now
Base/plinth trim panels, side, 200 mm Stainless steel for base/plinth components front and rear

Shop Now
Base/plinth, complete Stainless steel, for one-piece consoles

Shop Now
Base/plinth, stationary for PC, IW

Shop Now
Side panel for cable chamber

Shop Now
Fastening bolts for base/plinth, complete and base/plinth, static

Shop Now
Base/plinth trim, modular for base/plinth TS, stainless steel and base/plinth, complete, stainless steel

Shop Now
Base/plinth, complete Sheet steel, for AE, universal consoles TP

Shop Now
Wall spacer bracket HD

Shop Now
Mounting angles additional fastening attachment for TS IT

Shop Now
Flex-Block corner pieces, 100 mm for TS, TS IT, SE, PC, TE

Shop Now
Flex-Block corner pieces, 200 mm for TS, TS IT, SE, PC, TE

Shop Now
Cable chamber for VX, TS, SE

Shop Now
Baying connector for Data Rack

Shop Now
Flex-Block trim panels, 100 mm, with brush strip for Flex-Block corner pieces

Shop Now
Flex-Block trim panels, 100 mm, solid for Flex-Block corner pieces

Shop Now
Flex-Block trim panels, 100 mm, vented for Flex-Block corner pieces

Shop Now
Base/plinth adaptor, stainless steel for twin castors and levelling feet

Shop Now
Flex-Block trim panels, 200 mm, solid for Flex-Block corner pieces

Shop Now
Concrete base/plinth for CS New Basic enclosure

Shop Now
Transport kit for TS IT

Shop Now
Stabilisation for VX IT

Shop Now
Transport kit for VX, VX IT empty enclosures

Shop Now
Castor module for VX, VX IT

Shop Now
Twin castors

Shop Now
Transport castors for TE

Shop Now
Base mount for TS IT

Shop Now
Gland plate, one-piece, vented for TS IT

Shop Now
Gland plate for TS IT

Shop Now
Gland plate modules, vented for TS, TS IT, SE

Shop Now
Gland plate modules for cable entry for TS, TS IT, SE

Shop Now
Gland plate module, one-piece, with brush strip for VX IT

Shop Now
Gland plate module, multi-piece, with brush strip, super-airtight for VX IT

Shop Now
Gland plate set, multi-piece, solid for VX IT

Shop Now
Gland plate module for side cable entry for VX IT

Shop Now
Gland plate for VX, VX IT, VX SE

Shop Now
Sliding panel for VX, VX IT, VX SE

Shop Now
Clips for gland plates

Shop Now
Filter mat for gland plate, one-piece, vented

Shop Now
Module plates for TE

Shop Now
System divider for VX

Shop Now
System divider for VX

Shop Now
Width divider

Shop Now
Base mounting bracket

Shop Now
Reinforcement bracket for TS, SE, TP universal console

Shop Now
Side panels, divided With lockable cam lock, for TS IT

Shop Now
Side panel, lockable for TS, TS IT

Shop Now
Side panel, vertically divided for VX IT

Shop Now
Side panel, horizontally divided for VX IT

Shop Now
Side panel, screw-fastened, sheet steel for TS, TS IT

Shop Now
Side panel, screw-fastened, sheet steel for TS, TS IT

Shop Now
Baying frame IP 66/NEMA 4, NEMA 4X for TS

Shop Now
Side panel for TE 8000

Shop Now
Side panel, screw-fastened, sheet steel for VX

Shop Now
Side panels, screw-fastened, stainless steel for VX

Shop Now
Internal latch for side panel, screw-fastened, sheet steel

Shop Now
Internal latch for side panel, lockable

Shop Now
Enclosure panel holders, internal for TS, SE

Shop Now
Hinge for side panel TS, screw-fastened, sheet steel

Shop Now
Hinge for side panel, screw-fastened, sheet steel

Shop Now
Partition, one-piece, for slide-in fixing for VX IT

Shop Now
Partition, vertically divided, for screw fastening for VX IT

Shop Now
Partition for TS IT

Shop Now
Divider panel for TS

Shop Now
Divider panel for module plates for TS

Shop Now
Divider panel for VX

Shop Now
Divider panels for module plates, for VX

Shop Now
Cover with door for VX

Shop Now
Cover with door for TS

Shop Now
Combination angle for VX, TS

Shop Now
Baying connector for VX IT, TS IT

Shop Now
Baying connector, external, 3 mm for VX IT

Shop Now
Baying kit, VX25 to TS 8

Shop Now
Baying cover, top for VX, VX IT, TS, TS IT

Shop Now
Baying bracket, internal for VX, VX IT

Shop Now
Baying block, internal for VX, VX IT

Shop Now
Baying connector, external for VX

Shop Now
Quick-fit baying clamps for VX

Shop Now
Baying seal for VX

Shop Now
Angular baying bracket for VX

Shop Now
Baying cover, vertical

Shop Now
Baying VX

Shop Now
Baying brackets for TS/TS, TS/PS

Shop Now
Angular baying bracket

Shop Now
Baying connector, external for TS/TS

Shop Now
Baying clamp, horizontal for TS/TS, TS/PS

Shop Now
Baying clamp, vertical for TS/TS

Shop Now
Baying clamp, vertical for TS/PS

Shop Now
Angular baying bracket for TS/TS

Shop Now
Baying attachment, vertical for TS/TS with divider panel

Shop Now
Quick-fit baying clamp, one-piece for TS/TS

Shop Now
Quick-fit baying clamp, three-piece for TS/TS

Shop Now
Baying attachment, vertical for TS/TS

Shop Now
Baying clamp, horizontal for back-to-back mounting

Shop Now
Wall mounting bracket for AX plastic

Shop Now
Protective roof for AX

Shop Now
Spacer for roof plate

Shop Now
Eyebolts for AX

Shop Now
Wall mounting bracket for AX sheet steel, KX sheet steel, AX IT, EL

Shop Now
Wall angle for AX, KX, AX IT, AE, KL

Shop Now
Eyebolts for VX, TS, SE

Shop Now
Wall bracket for VX, VX IT, VX SE, TS, TS IT, SE

Shop Now
Roof plate for cable entry, two-piece for VX, VX IT, TS, TS IT

Shop Now
Roof plate, vented for TS, TS IT

Shop Now
Vent cover for TS, TS IT

Shop Now
Frame connector, adjustable for Comfort Panel

Shop Now
Enclosure connectors Adjustable

Shop Now
Wall mounting bracket Vertically hinged

Shop Now
Pressure stoppers for roof plate

Shop Now
Roof plate for cable entry glands for VX, VX IT

Shop Now
Roof plate IP 55, solid for VX, VX IT

Shop Now
Roof plate IP 2X with ventilation hole for VX, VX IT

Shop Now
Top-mounting module for TS

Shop Now
Side panel for top-mounting module TS

Shop Now
Top-mounting module for VX

Shop Now
Side panel for top-mounting module VX

Shop Now
Pole clamp for AX, KX, AX plastic, AX IT

Shop Now
Spacer for roof plate

Shop Now
Top-mounting module for TS

Shop Now
CORROSION PROTECTION PRIMER

Shop Now
Dust guard trim for VX, TS, SE

Shop Now
Dust guard trim for AX, KX

Shop Now
PRIMER/PAINT

Shop Now
Slide rail for mounting plate VX

Shop Now
Partial mounting plates for VX

Shop Now
Hinge attachment for partial mounting plate VX

Shop Now
Partial mounting plate holder for partial mounting plate VX

Shop Now
Mounting plate for CS New Basic enclosure

Shop Now
Partial assembly plate for VX

Shop Now
Cross-brace for mounting plates for VX, TS, SE

Shop Now
Mounting plate infill for VX, TS

Shop Now
Multifunction mounting kit for mounting plate VX

Shop Now
Installation kit for back-to-back mounting plates

Shop Now
Mounting plate attachment Type A, for VX

Shop Now
Mounting plate attachment Type C, for VX

Shop Now
Mounting plate attachment Type B, for VX

Shop Now
Slide rail for mounting plate TS

Shop Now
Installation kit for mounting plates TS, SE, back-to-back

Shop Now
Mounting plate for TS

Shop Now
Partial mounting plates, locatable into rails for TP, TS, SE

Shop Now
Mounting clip for support rails

Shop Now
Adaptor rail for PS compatibility

Shop Now
Mounting bracket for interior installation

Shop Now
Cable clamp rails, depth-variable for TS, TE

Shop Now
C rails for TS, SE

Shop Now
Combination rails for VX IT

Shop Now
Rail for interior installation for CM, TP

Shop Now
C rails 30/15 to EN 60 715 for VX, TS, SE

Shop Now
System support rails

Shop Now
Cable clamps for cable clamp rails

Shop Now
Rail for interior installation AX

Shop Now
Captive nuts for VX

Shop Now
Hex wrench set for Allen screws

Shop Now
U nut

Shop Now
SZ U nut, for thread M5

Shop Now
Multi-tooth screws

Shop Now
SZ U nut, for thread M6

Shop Now
Attachment TS for TS punched section with mounting flange, 17 x 73 mm

Shop Now
Spring nuts with screws for T-slot mounting angle

Shop Now
Self-tapping screws

Shop Now
Metal multi-tooth screws

Shop Now
Captive nuts

Shop Now
Screws for interior installation for AX plastic

Shop Now
Assembly screws

Shop Now
Spring nut M5

Shop Now
SZ U nut, for thread M8

Shop Now
Angle bracket PS

Shop Now
Component shelf, static installation for TS, SE, PC, IW, prepared for fan expansion kit

Shop Now
Installation kit, depth-variable for 482.6 mm (19") component shelves

Shop Now
Handles for pull-out component shelves

Shop Now
Component shelf, pull-out, 2 U for one 482.6 mm (19") mounting level

Shop Now
Component shelf, 482.6 mm (19") configuration Enclosures with L-shaped mounting angles front and rear

Shop Now
Component shelf, pull-out for TE

Shop Now
Component shelf, static installation for 482.6 mm (19") system punchings, depth-variable for VX IT, TE, TS IT

Shop Now
Component shelf, static installation for TE

Shop Now
Telescopic slides for component shelves, for mounting on the VX enclosure frame and for upgrading existing VX and TS applications

Shop Now
Base mounting plate for base/plinth VX and AX and base/plinth, complete

Shop Now
Base/plinth installation bracket for base/plinth system VX, sheet steel and stainless steel

Shop Now
SZ System Light LED, 400 Lumen, L: 262 mm, 100-240 V

Shop Now
SZ System Light LED, 600 Lumen, L: 337 mm, 100-240 V

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V, with earthing-pin socket

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V, with eaerthing-pin socket for Great Britain

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V, with eaerthing-pin socket for Belgium/France

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-240 V, with eaerthing-pin socket for Switzerland

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 100-125 V, with eaerthing-pin socket for USA

Shop Now
SZ System Light LED, 900 Lumen, L: 437 mm, 24 V DC

Shop Now
SZ System Light LED, 1200 Lumen, L: 437 mm, 100-240 V, with integral motion detector

Shop Now
SZ System Light LED, 1200 Lumen, L: 437 mm, 100-125 V, with integral motion detector

Shop Now
SZ System Light LED, 1200 Lumen, L: 437 mm, 24 V DC, with integral motion sensor

Shop Now
SZ Connection cable, for power supply, 2-pole, 100-240 V, L: 3000 mm

Shop Now
SZ Connection cable, for through-wiring, 3-pole, 100-240 V, L: 1000 mm

Shop Now
SZ throughwiring, 3-pole, for socket box, L: 200 mm, 100-240V AC

Shop Now
SZ Connection cable, for through-wiring, 2-pole, 24 V DC, L: 1000 mm

Shop Now
SZ Connection cable, for through-wiring, 2-pole, 100-240 V, L: 1000 mm

Shop Now
SZ Connection cable, for power supply, 3-pole, 100-240 V, L: 3000 mm, UL

Shop Now
SZ Connection cable, for power supply, 2-pole, 100-240 V, L: 3000 mm, UL

Shop Now
SZ Connection cable, for through-wiring, 3-pole, 100-240 V, L: 1000 mm, UL

Shop Now
SZ Connection cable, for through-wiring, 2-pole, 100-240 V, L: 1000 mm, UL

Shop Now
SZ Door-operated switch, with connection wire, L: 800 mm, black, UL

Shop Now
SZ wire for door-operated switch, L: 2000 mm, black, Connection accessories for self-assembly

Shop Now
SZ wire for door-operated switch, L: 3000 mm, black, UL, Connection accessories for self-assembly

Shop Now
SZ socket box for LED system light, with socket for UK,

Shop Now
With socket for Germany,, with earthing-pin (type F, CEE 7/3)

Shop Now
SZ socket box for LED system light, with socket for France/Belgium,

Shop Now
SZ socket box for LED system light, with socket for Switzerland,

Shop Now
SZ socket box for LED system light, with socket for China,

Shop Now
SZ socket box for LED system light, with socket for USA/Canada,

Shop Now
SZ Connection cable, for power supply, 2-pole, 24 V DC, L: 3000 mm

Shop Now
Compact light

Shop Now
SZ System light LED compact, WHD: 230x33x21 mm, 24 V DC, Integral on/off/door-operated switch mode

Shop Now
SZ System light LED compact, WHD: 330x33x21 mm, 24 V DC, Integral on/off/door-operated switch mode

Shop Now
SZ System light LED compact, WHD: 430x33x21 mm, 24 V DC, Integral on/off/door-operated switch mode

Shop Now
SZ System light LED compact, WHD: 530x33x21 mm, 24 V DC, Integral on/off/door-operated switch mode

Shop Now
Adaptor for connector cut-outs

Shop Now
Cover plate for connector cut-outs

Shop Now
Plastic gland plate with metric knockouts, for AX

Shop Now
Metal gland plate with metric knockouts, for AX

Shop Now
Gland plate with foam rubber cable clamp strip, for AX

Shop Now
Self-adhesive foam cable clamp strip

Shop Now
Seal insert For plastic gland plate, modular and sealing frame, modular

Shop Now
Inlay For plastic gland plate, modular and sealing frame, modular

Shop Now
Locking clip for seal insert

Shop Now
Stepped collar For wall thicknesses from 1.5 to 4.5 mm

Shop Now
Connector grommets

Shop Now
Cable entry grommets

Shop Now
Brush kit for cable duct VX IT

Shop Now
Cover plate for CM, TP

Shop Now
Edge protector

Shop Now
Brush strip

Shop Now
Cable clip for C rail, combination rail

Shop Now
Gland plate with brush insert for EL

Shop Now
Gland plate for metric cable glands for EL

Shop Now
Brush strip, super-airtight

Shop Now
Brush kit for TE 8000

Shop Now
Module plates For 16/24-pole connectors

Shop Now
Module plates Solid

Shop Now
Module plates for cable entry

Shop Now
Module plates with cable sleeve

Shop Now
Section for cable entry, centre for VX, SE

Shop Now
Section for cable entry, rear for VX, SE

Shop Now
Cable entry plates for VX

Shop Now
Seal insert For plastic gland plate, modular and sealing frame, modular

Shop Now
Slot-in cable gland, 482.6 mm (19")

Shop Now
Connector gland for connector cut-outs (24-pole)

Shop Now
Cable set, temperature sensor

Shop Now
Cable cutter

Shop Now
Cable gland HD

Shop Now
Assembly tool for HD cable glands

Shop Now
Cable gland, polyamide

Shop Now
Cable gland, brass

Shop Now
Cable gland module for support arm connection 130 mm

Shop Now
Cable gland for IW worktops

Shop Now
Gland plate for metric cable glands for EL

Shop Now
Nylon loop

Shop Now
Cable conduit

Shop Now
Cable conduit holder

Shop Now
Cable ties

Shop Now
Cable attachment

Shop Now
Cable clamp rail C-section, for mounting plates, for VX, TS, SE, CM, TP

Shop Now
Cable duct for TS IT

Shop Now
Brush kit for TS IT

Shop Now
Nylon tape holder

Shop Now
Cable management panel with steel rings

Shop Now
Cable management panel with cable routing bars

Shop Now
Cable management panel with front flap

Shop Now
Cable routing channel 482.6 mm (19")

Shop Now
Cable manager

Shop Now
Cable clamping bracket

Shop Now
Cable route for TE

Shop Now
Mounting frame for Network Cable Organizer

Shop Now
Cable routing across the 482.6 mm (19") mounting level

Shop Now
Cable clamp, variable for enclosure-independent mounting

Shop Now
Blanking cover for Network Cable Organizer

Shop Now
Complete CAT 6 system for Network Cable Organizer

Shop Now
CAT 6 cassettes for Network Cable Organizer

Shop Now
Identification labels for Network Cable Organizer

Shop Now
Cable duct

Shop Now
Wall mounting bracket for GA

Shop Now

Plastic gland plate with metric knockouts, for AX

Fibre-optic cassettes for Network Cable Organizer

Cable shunting ring

Cable routing bars for universal use

Cable routing bars, 482.6 mm (19") attachment

Snap-in cable routing for clipping into the system punchings.

Nylon loop cable holder self-adhesive

Fibre-optic shunting rings

Cable management duct, horizontal 482.6 mm (19")

Cable management panel with plastic rings

Surplus cable holder

Shunting ring

Cable management panel, 2 U

Cable tray, 2 U

Cable clamp rail Right-angle section for VX, TS, SE, PC, base/plinth system VX

Punched section with mounting flange, 14 x 39 mm for VX, TS, SE, PC, IW, AX

Brush strip, vertical for VX IT

TS adaptor for wiring systems Adaptor rail for the LSC wiring system.

Cable organiser for TE open

Cable duct for vertical TS section

Aluminium rivet

Cable route for TS

Cable clamp rail, depth-variable for VX IT, TE

Cable duct for VX IT, TE

Cable route for VX, VX IT

Cable management panel with brush strip 482.6 mm (19")

Fibre-optic cable management panel, 1 U 482.6 mm (19")

Cable clamp rail for TS, TS IT

System supports for cable routes for VX, VX IT

Cable finger for VX IT

SZ Connection cable, for System light LED compact, L: 3000 mm

SZ Door-operated switch, for System light LED compact, L: 3000 mm, with LED connection cable

SZ Door-operated switch, for System light LED compact, L: 1000 mm, with LED interconnecting cable

SZ Interconnecting cable, for System light LED compact, L: 600 mm

SZ Interconnecting cable, for System light LED compact, L: 1000 mm

SZ Interconnecting cable, for System light LED compact, L: 3000 mm

VX Mounting kit magnet, for LED system light

SZ Compact light, WHD: 455x59x24 mm, 8 W, 100-240 V, 50/60 Hz, Integral on/off/door-operated switch mode, ENEC

SZ Compact light, WHD: 705x59x24 mm, 14 W, 24 V DC, Integral on/off/door-operated switch mode, ENEC

SZ Mounting kit magnet, for compact light and System light LED compact

SZ Courtesy light, WHD: 452x117x50 mm, 14 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

SZ Courtesy light, WHD: 452x117x50 mm, 14 W, 100-240 V, 50/60 Hz, with door-operated switch, with earthing-pin socket

SZ Courtesy light, WHD: 682x117x50 mm, 18 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

SZ Courtesy light, WHD: 682x117x50 mm, 18 W, 100-240 V, 50/60 Hz, with door-operated switch, with earthing-pin socket

SZ Courtesy light, WHD: 987x117x50 mm, 30 W, 100-240 V, 50/60 Hz, without door operated switch, with earthing-pin socket

SZ Courtesy light, WHD: 987x117x50 mm, 30 W, 100-240 V, 50/60 Hz, with door operated switch, with earthing-pin socket

Door-operated switch

Mounting kit for door-operated switch for TE 8000

Installation kit for door-operated switch in TE 7000

Adaptor power pack for LED compact system light

SZ Door-operated switch, with connection wire, L: 800 mm, black

SZ Jack, for power supply and through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

SZ Jack, for power supply and through-wiring, 2-pole, 24 V DC, Connection accessories for self-assembly

SZ Jack, for power supply and through-wiring, 2-pole, 100-240 V, Connection accessories for self-assembly

SZ Connector, for through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

SZ Connector, for through-wiring, 2-pole, 24 V DC, Connection accessories for self-assembly

SZ Connector, for through-wiring, 2-pole, 100-240 V, Connection accessories for self-assembly

LED system light US version

SZ Connection cable, for power supply, 3-pole, 100-240 V, L: 3000 mm

SZ System Light LED, 400 Lumen, L: 262 mm, 100-240 V

SZ System Light LED, 600 Lumen, L: 337 mm, 100-240 V

Component shelf 2 U, static installation

Component shelf for frame attachment Enclosure width 600 and 800 mm

Component shelf 1 U, static installation 482.6 mm (19") system punchings

Component shelf, pull-out for TS, SE, PC, IW

Fastening bolts for slotted component shelves

Component shelf, pull-out 482.6 mm (19") for VX IT, TE, TS IT

Mounting plate for terminal boxes KX, bus enclosures KX, terminal boxes HD, Ex enclosures

Baying connector, external for TS/TS

Baying connector, external, 9 mm for VX, VX IT, TS IT/TS IT with side panels

Cover plate for CM, TP

Levelling feet for VX, TS, SE, PC in stainless steel

Levelling feet for VX, VX IT, TS, TS IT, SE, PC, IW, Blue e+ chillers

Levelling feet with internal adjustment, for VX IT

Levelling feet for FlatBox, M10 x 20 mm

Base/plinth adaptor for twin castors and levelling feet

Door stay for AX

Door stay

Door stay for escape routes for TS, SE, PC